Precautionary Measures To Use Electrical HT/LT Panels In Summer - Gurgaon

As you are aware of the fact that, the temperature in the summer is increasing beyond our expectations and this is the reason we are getting to see electrical units catching fires. So, if you also have 415V, 50Hz power distribution, 3Ph 4wire, and electrical HT/LT panels installed at your place, this read is just for you. Through this exclusive post, we are going to share some guidelines on the precautions that you must take if you wish to avoid any problematic situation during the summer season.



To avoid power system failure, fire risks, and overheating hazards, keep all the points that we are going to discuss below in mind. So, let’s get started. The following precautions are not only applicable to HT/LT panels, but will also apply to HVAC panels, VFD panels, Fire Control Panels, and Synchronization Panels.

Take Care Of The Ventilation
Whether you are using a new electrical unit or an older one, make sure that it is placed in a well-ventilated area with adequate airflow. This helps in dispersing heat and thus restricts components from getting overheated. In case there is an obstruction in their way, clear it up. You can also make necessary checks to see if the in-built ventilation fan in the component is working properly or not.

Check For Signs Of Any Damage
This is yet another important thing to consider during the summer season. Carefully check the LT and HT panels on a regular basis to look for any signs of wear and tear or any physical damage. Look for partially damaged wires, loose connections, or corrosion, and take the necessary steps to fix them. This will help prevent cases such as electrical failures as well as fire. If you are not sure how to fix any problems, let the professionals do their task or contact electrical panel manufacturers such as Sun Solista to get the necessary assistance.

Inspect Any Overloading Issues


During the summer seasons, there are high chances of overloading because of the high demand for electricity. This happens because, at this stage, AC units, fans, and other such appliances are running at their full capacity needing more electricity. Hence, you must take care of this situation from time to time to avoid overheating of units and appliances. One more thing we suggest you do is avoid using the extension cords for those appliances that need electricity. In addition to that, if you are utilizing an electrical panel solar panel plant, then you must keep the inverter setting at 80-90%.

Keep A Check On The Temperature And Clean/Dry The Area


Apart from the measures given above, what you can do is install temperature monitoring devices to avoid overheating the panels. If you do not have a temperature monitoring device installed, then we suggest you contact Sun Solista as they can help you in monitoring the temperature as well as taking immediate actions to resolve any potential issues. We also advise you to clean the area around the electrical panels and keep it dry as moisture can result in the corrosion of the components. Do not store any liquid items near the electrical components.

Install Voltage Surge Protectors
During summers, we notice high voltage spikes frequently and to protect sensitive electronic equipment from getting affected due to such spikes, we suggest you install a surge protection device. This will also restrict component damage during lightning and summer storms.

Additional Measures To Consider
In addition to the measures that I have listed above, we suggest you take into consideration the following measures as well to avoid overheating and other hazards during the summer:

Do not forget to schedule regular maintenance for any electrical HT/LT panels and other electrical appliances
If you are using huge electrical components or panels at your workplace, make sure that you educate users about safety practices and proper usage
Additionally, look for any necessary upgrades and get the upgrades done by professionals such as Sun Solista team
Be ready to tackle any emergency situations and keep any emergency equipment in place
Check the manufacturer guidelines and adhere to them
To avoid shock hazards, make sure that you implement ground fault protection devices
If you see anything unusual happening with the equipment or control panels, contact the support assistants immediately
Take into consideration the more de-rating factors such as Sun Solista’s Solar 800V LT Panels
To conclude, we can say that it is very important to make sure that 415V and 800V LT panels are safe and reliable to use during the summer season. To ensure all of this, please take all the factors given above into consideration and implement all the necessary precautionary measures.